Chamber Vacuum Pack Machines

Chamber vacuum machines are simply a stainless steel box (the chamber) that has a seal bar (or bars) in it and a lid to close off the chamber. You place the product to be vacuumed in a vacuum pouch and then lay the open end of the pouch across the seal bar. With most of our chamber machines you then just close the lid to start the vacuum pump. They will automatically go through the vacuum cycle, gas flush cycle (if used), the sealing cycle and then the outside air is vented back into the chamber and the lid opens. Remove the finished package(s) and start over. This cycle generally takes less than 30 seconds. Chamber machines utilize a rotary vane vacuum pump that is capable of pulling a vacuum of about 2-3 torr (99.9% vacuum or 29.8" of mercury.) This is much tighter than an air operated nozzle machine (90% or 27" of mercury) or piston powered home machines (85% or 25" of mercury.) If you're not familiar with vacuum packing, we have a list of common vacuum definitions to help you understand just what these terms mean and a page of vacuum faq's to explain more about vacuum packing. These vacuum machines use a variety of vacuum pouches which are listed here. Our list of table-top chamber machines below goes from small to large. You can also see larger floor models here. We also have more food related vacuum chamber machines at our www.dougcare.com site.

MVS31 Chamber Vacuum Machine from minipack®-america
Larger Image (24 KB)
MVS-31 CHAMBER MACHINE
1 Seal Bar = 1 @ 12.25" Size = 16"W x 19"D x 26"H (lid open) Chamber Size = 12.75" x 11.75" x 6" Deep Max Product Length = 9.5" from back of seal bar to rear of chamber. Vacuum Pump = DVP 6m³/H @ 115 Volt/60/1 phase, .25HP, 9A	Features: Digital Controls w/ 9 programs Transparent Lid Electronic Pressure Sensor 4mm Seal w/ cut-off Stainless Steel Construction Removable Seal Bar	Shipping Weight 100 pounds F.O.B. Orange, California LIST PRICE	IPE Price
OPTIONS For a better understanding of just what these options are you can click on options above or call us at 559-539-3076 and we'd be happy to discuss them.
Seal Bar Option One: Two 4mm Seals Price	Seal Bar Option Two: One 6mm Seal & One Cut-Off Wire Price	Gas Flush Price	Slant Tray For Liquids (packaging aide when packing liquid filled bags) Price	220 volt/60/1 phase option Price
	Installation and Training For those who prefer to have a service technician make sure your machine is set up correctly and train the operator. May not be available in all locations. Price			Vacuum Bag Loaders (helps load product into vacuum pouches) DCE Price
		Gas Analyzers-More Info Check gas flushed packages for correct gas content! 10% OFF when purchased with vacuum machine Four models available.
The MVS-31 is a chamber vacuum machine with one seal bar of 12.25" and a domed lid (total product height is 6"). It has the same electronics as the other MVS series vacuum machines which includes up to 9 programs in the digital controller. The only difference with the MVS-31 is you must push a "start" button to start the vacuum process. You can order the seal bar configured in one of 3 different ways: 1. Standard is one 4mm wide seal plus a hot cut-off wire (enables you to tear off any excess bag length); 2. Option one is two 4mm wide parallel seals (no cut-off); and 3. Option two is one 6mm wide seal plus a hot cut-off wire. Minipack chamber machines have a one year parts warranty. Compare machines feature to feature on our MVS comparison page. Lead-time to ship most MVS chamber machines is 5-7 business days.

MVS-45 Chamber Vacuum Machine from minipack®-america

MVS-45 - SINGLE SEAL BAR MACHINE
1 Seal Bar = 17.75" (front) Size = 22"w x 24"d x 32"H (lid open) Chamber Size = 18" x 18" x 9" Deep Max Product Length = 16" from back of seal bar to rear of chamber. Vacuum Pump = Busch 20m³/H @ 115 Volt/60/1 phase 1 HP, 18 Amps	Features: Digital Controls w/ 9 programs Transparent Lid Electronic Pressure Sensor 4mm Seal w/ cut-off Adjustable Soft Air Removable Seal Bar Stainless Steel Construction	Shipping Weight 210 pounds F.O.B. Orange, California LIST PRICE	IPE Price
AVAILABLE OPTIONS
Seal Bar Option One: Two 4mm Seals Price	Seal Bar Option Two: One 6mm Seal & One Cut-Off Wire Price	Gas Flush Kit Price	Slant Tray For Liquids Price	220 volt/60/1 phase option Price
	Installation and Training For those who prefer to have a service technician make sure your machine is set up correctly and train the operator. May not be available in all locations. Price			Vacuum Bag Loaders (helps load product into vacuum pouches) DCE Price
		Gas Analyzers-More Info Check gas flushed packages for correct gas content! 10% OFF when purchased with vacuum machine Four models available.
The MVS-45 has a single seal bar that is 17.75" long located on the front side of the machine. It is made from stainless steel and comes with digital controls with 9 programs, adjustable soft air, electronic pressure sensor instead of vacuum timer. You can order the seal bar configured in one of 3 different ways: 1. Standard is one 4mm wide seal plus a hot cut-off wire (enables you to tear off any excess bag length); 2. Option one is two 4mm wide parallel seals (no cut-off); and 3. Option two is one 6mm wide seal plus a hot cut-off wire. Minipack chamber machines have a one year parts warranty. Compare machines feature to feature on our MVS comparison page. Lead-time to ship most MVS chamber machines is 5-7 business days. All Minipack vacuum machines larger than the MVS-31 now come with a Busch® vacuum pump.


MVS-45II - DOUBLE SEAL BAR MACHINE
2 Seal Bars = 17.75" (left & right) Distance Between Seal Bars: = 14" Footprint = 22"W x 24"D x 32"H (lid open) Chamber Size = 18" x 18" x 9" Deep Vacuum Pump = Busch 20m³/H @ 115 Volt/60/1 phase 1 HP, 18 Amps	Features: Digital Controls w/ 9 programs Transparent Lid Electronic Pressure Sensor 4mm Seal w/ cut-off Removable Seal Bars Adjustable Soft Air Stainless Steel Construction	Shipping Weight 210 pounds F.O.B. Orange, California LIST PRICE	DCE Price
AVAILABLE OPTIONS
	Seal Bar Option One: Two 4mm Seals DCE Price	Seal Bar Option Two: One 6mm Seal & One Cut-Off Wire DCE Price $171.00	Gas Flush Kit DCE Price	Slant Tray For Liquids DCE Price
	Installation and Training For those who prefer to have a service technician make sure your machine is set up correctly and train the operator. May not be available in all locations. Price			Vacuum Bag Loaders (helps load product into vacuum pouches) DCE Price
		Gas Analyzers-More Info Check gas flushed packages for correct gas content! 10% OFF when purchased with vacuum machine Four models available.
The MVS-45II is a chamber vacuum machine with two seal bars that are 17.75" long on the left and right side of the chamber. The MVS-45II is made from stainless steel and comes with digital controls with 9 programs, adjustable soft air, electronic pressure sensor instead of vacuum timer. You can order the seal bar configured in one of 3 different ways: 1. Standard is one 4mm wide seal plus a hot cut-off wire (enables you to tear off any excess bag length); 2. Option one is two 4mm wide parallel seals (no cut-off); and 3. Option two is one 6mm wide seal plus a hot cut-off wire. Minipack chamber machines have a two year limited non-wear item parts warranty. Compare machines feature to feature on our MVS comparison page. Lead-time to ship most MVS chamber machines is 2-3 business days. Minipack vacuum machines now come with a Busch® vacuum pump.

MVS-41 Chamber Vacuum Machine from minipack®-america

MVS-41 - THREE SEAL BAR MACHINE
3 Seal Bars 2 @ 12.25" (sides) and 1 @ 20.25" (front) Chamber Size = 24" x 13" x 6"H Size = 28"w x 20"d x 26"H (lid open) One or even two of the seal bars can be removed for more room. Vacuum Pump = Busch 20m³/H @ 115 Volt/60/1 phase, 1 HP, 18 Amps	Features: Digital Controls w/ 9 programs Transparent Lid Electronic Pressure Sensor 4mm Seal w/ cut-off Adjustable Soft Air Removable Seal Bar Stainless Steel Construction	Shipping Weight 240 pounds F.O.B. Orange, California LIST PRICE	IPE Price
AVAILABLE OPTIONS
Seal Bar Option One: Two 4mm Seals Price	Seal Bar Option Two: One 6mm Seal & One Cut-Off Wire Price	Gas Flush Kit Price	220 volt/60/1 phase option Price
	Installation and Training For those who prefer to have a service technician make sure your machine is set up correctly and train the operator. May not be available in all locations. Price			Vacuum Bag Loaders (helps load product into vacuum pouches) DCE Price
		Gas Analyzers-More Info Check gas flushed packages for correct gas content! 10% OFF when purchased with vacuum machine Four models available.
The MVS-41 has three seal bars, two that are 12.25" long located on the left and right side of the machine. The third seal bar is 20.25" long and is located across the front of the chamber. You can use it with all three bars in place to get more small pouches in per cycle or you can remove one or two of the bars to make more room inside the chamber for larger products. This seal bar configuration is ideal for long, skinny products. It is made from stainless steel and comes with digital controls with 9 programs, adjustable soft air, electronic pressure sensor instead of vacuum timer. You can order the seal bars configured in one of 3 different ways: 1. Standard is one 4mm wide seal plus a hot cut-off wire (enables you to tear off any excess bag length); 2. Option one is two 4mm wide parallel seals (no cut-off); and 3. Option two is one 6mm wide seal plus a hot cut-off wire. Minipack chamber machines have a one year parts warranty. Compare machines feature to feature on our MVS comparison page. Lead-time to ship most MVS chamber machines is 5-7 business days. All Minipack vacuum machines larger than the MVS-31 now come with a Busch® vacuum pump.

MVS-38 Vertical Chamber Vacuum Machine from minipack®-america

MVS-38 - VERTICAL CHAMBER FOR PACKING LIQUIDS OR LOOSE ITEMS (COFFEE BEANS)
Seal Bar 1 @ 16.75" (top) Chamber Size = 16.75" x 16.75" x 5"H Size = 19"w x 22"d x 30.5"H One or even two of the seal bars can be removed for more room. Vacuum Pump = Busch 20m³/H @ 115 Volt/60/1 phase, 1 HP, 18 Amps	Features: Digital Controls w/ 9 programs Transparent Lid Electronic Pressure Sensor 4mm Seal w/ cut-off Adjustable Soft Air Removable Seal Bar Stainless Steel Construction	Shipping Weight 225 pounds F.O.B. Orange, California LIST PRICE	IPE Price
AVAILABLE OPTIONS
	Vacuum Bag Loaders (helps load product into vacuum pouches) DCE Price	Gas Flush Kit Price	Forming Box Forms bag into "brick" ie. coffee bag Price	Installation and Training For those who prefer to have a service technician make sure your machine is set up correctly and train the operator. May not be available in all locations. Price
		Gas Analyzers-More Info Check gas flushed packages for correct gas content! 10% OFF when purchased with vacuum machine Four models available.
The MVS-38 is a vertical aligned chamber machine that is ideal for packing liquids and loose items such as coffee beans. It has one seal bars 16.75" long located at the top of the chamber. It is made from stainless steel and comes with digital controls with 9 programs, adjustable soft air, electronic pressure sensor instead of vacuum timer. You can order the seal bars configured in one of 3 different ways: 1. Standard is one 4mm wide seal plus a hot cut-off wire (enables you to tear off any excess bag length); 2. Option one is two 4mm wide parallel seals (no cut-off); and 3. Option two is one 6mm wide seal plus a hot cut-off wire. Minipack chamber machines have a one year parts warranty. Compare machines feature to feature on our MVS comparison page. Lead-time to ship most MVS chamber machines is 5-7 business days. All Minipack vacuum machines larger than the MVS-31 now come with a Busch® vacuum pump.

Back to Home Page Ordering/Shipping Information Site Map Search
Copyright � 2007-2010 Doug Care Equipment, Inc.

VACUUM PACK MACHINES AND POUCHES